Blog
Contact Us
Mobile: 008615515571373
Tel / Fax : 0086-371-63398802
Email :lisa@machinehall.com
Skype :jacobyaogelgoog
ADDR:7th Floor,Building 8,Jingkai Square,No.1507, Hanghai East Road,Free Trade Zone,Zhengzhou,China.
Maintenance of Automatic Pillow Packing Machine
Publish sherry On 2018-03-30
Packaging machine plays a protective role and beauty role to products, automatic pillow packing machine is mainly one kind of packing machine in the market, and how to maintain these pillow packing machine?
To keep the machine in good working condition, you should notice the following points:
1. The temperature of vacuum packaging machine should be at -10 degrees Celsius to 50 degrees Celsius. Relative humidity is not more than 85%. No corrosive gas i, no dust, no explosion hazard n the surrounding air.
2. To ensure the normal operation of the vacuum pump, vacuum pump motor is not allowed to reverse. Should always check the oil level Normal oil level of 1/2-3/4 oil window, and should not more than this line. When the oil color black, this time should be replaced with new oil.
3. Impurity filter should often wash, Clean once a month, if the packaging debris like objects should be shortened cleaning time.
4.Machine after working continuously for 2-3 months, should add the oil to the sliding part and the switch block. The connecting point of the heating rod also should add lubricating oil, ensure the normal movement of the machine.
5. The pressure relief, filtration, oil mist to be checked regularly, to ensure that the oil mist, oil cup have oil, filter cup has no oil.
6. Heating bar and silica gel should keep clean, do not adhere to a foreign matters, so as not to affect the sealing quality.
7. The paste on the two side of heating rod are insulations, When damaged, should be replaced in time, so as to avoid short circuit.
8. Vacuum packaging machine is not allowed to tilt and impact in the handling process.
9. Vacuum packaging machine must have reliable grounding device in installation.
10. Do not put your hand under the heating rod to prevent injury and cut off the power immediately in case of emergency.
To keep the machine in good working condition, you should notice the following points:
1. The temperature of vacuum packaging machine should be at -10 degrees Celsius to 50 degrees Celsius. Relative humidity is not more than 85%. No corrosive gas i, no dust, no explosion hazard n the surrounding air.
2. To ensure the normal operation of the vacuum pump, vacuum pump motor is not allowed to reverse. Should always check the oil level Normal oil level of 1/2-3/4 oil window, and should not more than this line. When the oil color black, this time should be replaced with new oil.
3. Impurity filter should often wash, Clean once a month, if the packaging debris like objects should be shortened cleaning time.
4.Machine after working continuously for 2-3 months, should add the oil to the sliding part and the switch block. The connecting point of the heating rod also should add lubricating oil, ensure the normal movement of the machine.
5. The pressure relief, filtration, oil mist to be checked regularly, to ensure that the oil mist, oil cup have oil, filter cup has no oil.
6. Heating bar and silica gel should keep clean, do not adhere to a foreign matters, so as not to affect the sealing quality.
7. The paste on the two side of heating rod are insulations, When damaged, should be replaced in time, so as to avoid short circuit.
8. Vacuum packaging machine is not allowed to tilt and impact in the handling process.
9. Vacuum packaging machine must have reliable grounding device in installation.
10. Do not put your hand under the heating rod to prevent injury and cut off the power immediately in case of emergency.